With this model, optimum filter fineness can be achieved – depending on the flow rate, up to 1 µm. Solids are drained manually.

Thanks to the robust design (double jacket, direct drive, double mounting), this model is also suitable for use under extreme conditions.

The self-priming design principle, in which the fluid is drawn in directly through the lower open drum, provides decisive advantages:

– High separation capacity, as the fluid enters the
centrifugal directly, avoiding swirling
– Low sludge residue moisture, as residual fluid flows
downwards before draining
– Flexible use, thanks to low inlet height (16 mm) and
return of cleaned fluid at approx. 0,5 bar pressure, mobile

Thanks to special materials, use in aggressive media (90° C, pH 1-14).

Application: Fine cleaning of industrial fluids, usually with receiving volumes of up to 15 m³, for example coolant lubricant emulsions and oils, surface treatment baths, washing or vibratory grinding fluids, etc.

The separator S-15 is also available in 3-phase version (simultaneous separation of a light secondary liquid phase, e.g. tramp oil).


icon_pdf Product Brochure


Technical Data:
Flow rate: 1 – 200 l/min (1 – 12.000 l/h)
Maximum sludge content in medium: 2 %
Sludge retention: 12 kg/Cycle
Centrifugation number: 1.960 x g
Achievable separating capacity: 1 µm